Solar floodlights MILO are made from durable and high-quality materials that will serve your needs for years. They are waterproof, easy to install and operate, and are a versatile, excellent solution for outdoor lighting needs. Thanks to the use of lenses on the LED diodes, the beam angle is 90*140, which provides much greater area illumination than lensless diodes. The floodlight has a 5200mAh 3.7V battery, which takes 5-6 hours to fully charge, and the working time depends on the selected mode. The Milo lamp features a dusk-to-dawn motion sensor and has four operating modes, which are activated by pressing the main button: press once, the LED will blink twice for mode A, press again, the LED will blink twice for mode B, press again, the LED will blink twice for mode C, another press puts the lamp into emergency mode, and it will light up at 30% at night – the motion sensor is disabled here. Another press turns off the lamp. Motion sensor range: 120° <10m. - Mode A – after detecting motion, the lamp turns on at 100% and stays on for 20 seconds, then turns off until the next motion detection. - Mode B – the lamp is off during the day, but after dusk, it automatically lights up at 30% power without detecting motion. Upon detecting motion, it turns on at 100% power, then after 20 seconds without motion detection, the lamp returns to 30% of its power. - Mode C – the lamp is off during the day, but after dusk, it automatically lights up at 30% – the motion sensor is deactivated here. - Emergency Mode – both the dusk and motion sensors are deactivated, and the lamp will continuously light at 30% power.