The BUTTERFLY solar fixture is a modern, intelligent, and energy-efficient light source with a unique appearance. The lamp features two light sources, front and back. Thanks to the solar panel located at the top of the lamp, it can convert solar energy into electrical energy without the need for external power or cables. The lamp is made from a safe and durable material resistant to damage. These types of lamps are used for outdoor lighting of various entrances, pathways, and driveways. Lamps from this family are equipped with a dusk-motion sensor and have two operating modes. Pressing the main button once puts the lamp in Mode A, pressing it again switches the lamp to Mode B, and pressing it once more turns the lamp off. Motion sensor range: 120° <6m. Mode A - When the battery power is more than 30%: The lamp automatically lights up at night and switches to full brightness upon detecting motion within <6m, then dims to a lower brightness (both front and back lights on) after 20 seconds of no motion. When the battery level is less than 30%: The lamp automatically lights up at night and switches to full brightness when motion is detected within <6m, then dims to a lower brightness (front light off, only back light on) after 20 seconds of no motion. Mode B - The lamp automatically lights up at dusk and remains at 50% brightness. After 5 hours or when the battery power is less than 30%, it switches to energy-saving mode, the lamp automatically turns on to 50% brightness when motion is detected within <6m, then dims to a lower brightness (front light off, only back light) after 20 seconds of no motion.